What can I use instead of a hex key?

What can I use instead of a hex key?

What can I use instead of a hex key?

2. Screwdrivers. Sometimes you can use small types of flathead screwdrivers as a hex wrench by putting the end in the socket so that the two edges of the screwdriver work as leverage in the hole to turn it. The wider the socket on the bolt or nut, the wider the flathead screwdriver you will want to use.

Is a hex key the same as a Torx key?

Hexagon keys are also known by several other names including hex key, hex wrench, Allen key, and Allen wrench. Torx is a brand name trademark for fastener heads and keys that have a six-point, star-like pattern.

Is hex or Torx better?

By design, Torx head screws resist cam-out better than Phillips head or slot head screws. ... The Torx design allows for a higher torque to be exerted than a similarly sized conventional hex socket head without damaging the head and/or the tool.

How do you remove a hex screw without a hex key?

By adding a couple of nuts to the threaded end and locking them tightly together, you can place the head of the bolt into the head of the hex bolt and then use a spanner on the nut or grips on the threads to turn the bolt which in turn will spin the hex bolt.

What can I use if I don't have an Allen key?

Sometimes you can use small types of flat headed screwdrivers as an allen wrench by putting the end in the socket so that the 2 edges of the screwdriver work as leverage in the hole to turn it. A wider socket on the bolt or nut, use a wider flathead screwdriver.

How do I make a hex key?

0:433:51Making An Extra Extra Long Hex Socket DIY Tool - YouTubeYouTube

Is there a difference between star and torx?

So what's the difference? Torx is a licensed product and requires manufacturers to follow their part prints. We feel that our Chapman star bits are an improvement on the official Torx bits. ... To answer the question, Chapman star bits fit Torx screws just as well as Torx bits, but are an overall improved design!

Are star keys and allen keys the same?

There is a difference between an Allen Key and a Torx Key. The hexagonal cross section is found in Allen keys, while the star- or asterisk-shaped cross section is found in Torx keys.

Why do manufacturers use torx screws?

Torx were designed to allow the screw to be tightened as far as possible. They exist because people wanted a head that would be more resistant to having the screwdriver spin out.

Should I use torx?

Torx screws are typically used in vehicles, motorcycles, bicycles, computer systems, hard disk drives and consumer electronics. The unusual star-shaped head makes them far more secure than regular flat-head or cross-head screws and allows higher torque transmission so screws and bolts can be tightened more securely.

What are the most common Torx sizes?

  • Common sizes include T10, T15, and T25 , while T35 and T47 tend to see specialized use. Only the proper driver can drive a specific head size without risk of damaging the driver or screw. The same series of Torx drivers is used to drive SAE, metric and other thread system fasteners, reducing the number of bit sizes required.

What are hexagon and Torx keys used for?

  • Hex, Ball-End Hex and Torx keys are used to drive hexagon and Torx recess cap screws, including socket head cap screws, countersunk (or flathead) cap screws, buttonhead cap screws, set screws and shoulder screws. Hex Keys: give you get more contact between the tool and the fastener compared to traditional slotted and Phillips® drive systems.

What size Torx wrench?

  • In regards to torx size, T27, it fits closely inside of hex size 5 mm. Unlike it's preceding size, T27 doesn't really have an SAE substitute. With the larger torx sizes, the hex counterparts become less straight forward. Since the torx wrenches start increasing in size a large increments, they often fall between to hex sizes.

What is the use of Torx driver?

  • Drivers. Since Torx drivers were uncommon early on,Torx screws were initially used to prevent consumers from disassembling certain devices.
  • Screw. Torx screws are threaded like a standard screw,but instead of being slotted like a regular or Phillips-headed screw they have a six-pointed star-shaped indention in the head of ...
  • Sizes. ...
  • Kits. ...
  • Tamperproof. ...

Related Posts: