Do you need special nails for treated lumber?

Do you need special nails for treated lumber?

Do you need special nails for treated lumber?

The manufacturers of ACQ, CA, ACZA and CCA and the treated wood industry are all recommending hot-dipped galvanized nails and stainless steel nails and screws with their treated wood products.

What kind of nails should you use for pressure treated wood?

The wood treatment industry recognizes the corrosive nature of ACQ in relation to fastening systems, and recommends hot-dipped galvanized or stainless steel nails be used.

Will pressure treated wood eat nails?

Indoor Wood Projects Because of the thinner coating of zinc oxide on electro-galvanized nails, they are the better choice for indoor projects, where they will have little exposure to corrosive materials like those found on pressure-treated wood, which should always be used outside.

Can you use electro galvanized nails in treated lumber?

Electra-galvanized nails, which were the predominant fasteners used with CCA lumber, are not acceptable for use with ACQ and CBA pressure treated lumber. The zinc content in the coating of those nails is insufficient for long-term resis- tance to the corrosive action by the chemistry in the new lumber.

Can you use zinc-coated screws in pressure treated wood?

Fasteners for preservative-treated wood shall be of hot dipped zinc-coated galvanized steel, stainless steel, silicon bronze or copper. ... In the absence of manufacturer's recommendations, a minimum of ASTM A653 type G185 zinc-coated galvanized steel, or equivalent, shall be used.

Can electro galvanized nails be used with pressure treated wood?

Electra-galvanized nails, which were the predominant fasteners used with CCA lumber, are not acceptable for use with ACQ and CBA pressure treated lumber. The zinc content in the coating of those nails is insufficient for long-term resis- tance to the corrosive action by the chemistry in the new lumber.

How long will electro galvanized nails last in treated lumber?

Ideal for indoor applications, the EG coating has an average lifespan of 5-10+ years depending on the environment.

Can I use zinc with pressure treated wood?

R317. Fasteners for preservative-treated wood shall be of hot dipped zinc-coated galvanized steel, stainless steel, silicon bronze or copper. ... In the absence of manufacturer's recommendations, a minimum of ASTM A653 type G185 zinc-coated galvanized steel, or equivalent, shall be used. Exceptions: 1.

What is a zinc nail?

Galvanized nails are zinc coated nails. They are nails that have been dipped into molten zinc to acquire a zinc coating. They will be compatible with zinc strips.

What kind of nails to use with pressure treated wood?

  • With pressure treated lumber, you MUST use hot-dipped galvanized nails. The nails you got are likely electroplated galvanized, which is thinner and weaker. The pressure treated wood will eat them.

What Screws do you use with treated wood?

  • Deck Screws, also known as green screws, are excellent for pressure-treated wood. These screws are coated with epoxy that helps protect pressure-treated wood from corrosion.

How long should you wait to paint pressure treated lumber?

  • Expect to wait three to four months for new pressure treated wood to completely cure before painting it. While you can handle new pressure treated boards without noticing the chemicals on your gloves, there is still moisture, pitch, and resin inside the wood which needs time to dry out before you paint it.

Can pressure treated be successfully painted?

  • Pressure treated wood is completely paintable, but it must be done properly, otherwise the paint won't last very long. Cleaning treated wood may seem like an unnecessary step in the painting process, but the wood may have collected dust, dirt, and debris during its travels from the manufacturer to your home.

Related Posts: