Can you use the same housing for Cricut blades?

Can you use the same housing for Cricut blades?

Can you use the same housing for Cricut blades?

Are Cricut Blades Interchangeable? The Fine Point blade and the Bonded Fabric blade can use the same housing. Also, the QuickSwap tools can use the same housing, so if you already own one, from now on, you only need to get the tip or blade.

Can I put a deep point blade in a fine point housing?

The blade housing that ships with the Explore machines was designed to house the Premium Fine-Point blades. The Cricut Explore Deep Point blade has a steeper blade angle (60 degrees vs. ... Use with the Bonded-Fabric blade housing; may also be used in Premium Fine-Point housing if needed.

Do you need a different housing for the deep cut blade?

The Cricut Deep-Cut Blade is an add-on blade that works with both the Cricut Explore and the Cricut Maker. It's designed to be stronger than the Fine-Point Blade and uses a different angle and depth-of-cut to cut thicker materials. You will need to buy this blade and housing separately.

What do you use the deep point blade on Cricut maker?

With the Deep-Point Blade, you can cut most materials up to 1.5mm thickness including poster board, heavy cardstock, and more. For use with Cricut Maker and Explore cutting machines (including the Explore, Explore One, Explore Air, and Explore Air 2.)

Does Quick Swap housing come with Cricut Maker?

QuickSwap System Included with the Cricut Maker is a fine-point blade and the rotary blade for cutting fabric. The knife blade is available as a separate purchase and has its own attachment. ... To swap any blade in the QuickSwap System just press the top of the housing to release the attachment.

What is the Cricut premium fine point blade used for?

The Cricut Premium Fine-Point Blade resists wear and breakage for longer life allowing for even more project possibilities with hours of cutting. Blades are designed to cut light- to mid-weight materials such as cardstock, vinyl, iron-on, poster board and light-weight fabrics.

What can you cut with a deep point blade?

What can I cut with the Deep Point Blade?

  • Magnet.
  • Chipboard.
  • Stamp material.
  • Thick cardstock.
  • Stiffened Felt.
  • Poster Board.
  • Foam sheets.
  • Cardboard.

What is the deep point blade used for?

This blade can be used to cut chipboard, rubber stamp material, thick cardstock, stiffened felt, foam sheets, and cardboard. It will cut most materials up to 1.5 mm thick.

How deep can the fine-point blade cut?

1.5mm With the Deep-Point Blade, you can cut most materials up to 1.5mm thickness including poster board, heavy cardstock, and more. For use with Cricut Maker and Explore cutting machines (including the Explore, Explore One, Explore Air, and Explore Air 2.)

What is the Deep-Point Blade used for?

This blade can be used to cut chipboard, rubber stamp material, thick cardstock, stiffened felt, foam sheets, and cardboard. It will cut most materials up to 1.5 mm thick.

Can a deep point blade be used in any Blade Housing?

  • The Deep Point blade must be used with the Deep Point blade housing and cannot be put in other blade housings. The Bonded Fabric Blade was designed to cut bonded or stabilized fabric. This blade is made from premium German carbide steel and works best with the fabric grip mat.

Can you use a fine point blade on a Cricut machine?

  • Use extreme caution. Adult use only. Note: Deep-Point blades should be used only in Deep-Point blade housings, and Premium Fine-Point blades should be used only in the Premium Fine-Point blade housing. Tip: To know how to change the fine-point blade in your Cricut machine visit this help article.

Which is the right hand side of a fine point blade?

  • Due to this, you install it in the right hand side like a blade. The Fine-Point blade comes stock with the Explore Air 2 and Cricut Maker machines. The blade housing is available either gold or silver in color (both are the same).

What kind of cuts can a fine point blade make?

  • The fine point blade was designed to make intricate cuts on a variety of thin to medium-weight materials such as cardstock, vinyl, iron-on and more. The blade has a 45-degree point and can handle most of your normal cutting needs. If you are not achieving the cuts you desire, the blade maybe dull and you may need to change it out.

Related Posts: